- The cabling must be carried out by specialist personnel and fitted with suitable anti-static precautions.
- Before handling the controller, disconnect the power and all parts connected to it.
- To guarantee compliance with EC regulations, the power supply must have a galvanic isolation of at least 1500Vac.
| Power supply | 24 Vdc |
|---|---|
| Voltage range | 22 - 27 Vdc |
| Max. absorption | 30W |
Connector
| CN1 | Terminal | Symbol | Description |
|---|---|---|---|
  | 1 | L1/+ | DC power positive |
| 2 | GROUND | Gnd-PE (signals) | |
| 3 | L2/- | DC power 0V |
Connection examples for 24Vdc power supply
Use an isolated power unit with 24Vdc +/-5% output conform to EN60950-1.
 | Use two separate power units: one for the control circuit and one for the power circuit |
 | For a single power unit, use two separate lines: one for the control and one for the power |
 | DO NOT use the same lines for the power circuit and the controller |